2006 Mitsubishi Grandis

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

multiple chips on screen

Front Windscreen wiper does not clear the windscreen effectively both side (3.4 (b) (ii))

Headlamp lens seriously defective both side (4.1.1 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim not tested (4.1.2 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

multiple chips on screen

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Spare tyre defective ()

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Spare tyre defective ()

Front exhaust mounting broken but supported ok

Rear Shock absorber has slight corrosion to the casing both sides (2.7.2a)

mil lamp on

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Front exhaust mounting broken but supported ok

Rear Shock absorber has slight corrosion to the casing both sides (2.7.2a)

mil lamp on

MIL on

Spare tyre defective ()

front exhaust hanger support perished

oil leak

Nearside Headlamp aim too high (1.8)

Seat belt retracting mechanism defective middle center (5.2.5b)

MIL on

Rear Brake pad(s) wearing thin (3.5.1g)

front exhaust hanger support perished

oil leak

Rear Brake pad(s) wearing thin (3.5.1g)

front exhaust hanger broken

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

front exhaust hanger broken

Rear Brake pipe slightly corroded (3.6.B.2c)

mil lamp on

Front Exhaust system not adequately supported (7.1.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

mil lamp on

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

mil lamp on

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)