2007 Mazda 3

Brake disc worn, but not excessively Front and Rear (1.1.14 (a) (i))

Coil spring corroded Front and Rear Nearside and Offside (5.3.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Front and Rear Nearside and Offside Inner Sills (6.1.1 (c) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Suspension component corroded but not seriously weakened Front and Rear Nearside and Offside/Front Sub Frame /Rear Axle (5.3.3 (b) (i))

Brake disc worn, but not excessively Front and Rear (1.1.14 (a) (i))

Coil spring corroded Front and Rear Nearside and Offside (5.3.1 (b) (i))

Front Headlamp aim projected beam image is obviously incorrect Nearside and Offside (4.1.2 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced Front and Rear Nearside and Offside Inner Sills (6.1.1 (c) (i))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Suspension component corroded but not seriously weakened Front and Rear Nearside and Offside/Front Sub Frame /Rear Axle (5.3.3 (b) (i))

Front Brake disc worn, but not excessively both sides (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Offside Rear Stop lamp(s) slightly affected by the operation of another lamp (4.3.3 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, but not excessively both sides (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Offside Rear Stop lamp(s) slightly affected by the operation of another lamp (4.3.3 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

rear axle has slight surface corrosion

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

BOTH Front Brake Discs slightly worn.

Factory fitted Engine Cover.

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear Bush (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear Bush (2.4.G.2)

Factory fitted Engine Cover.

Factory fitted Sill Covers.

Gear Selector Lever stiff.

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear Bush (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear Bush (2.4.G.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

recommend front wheel alignment check/adjust

Child seat fitted not allowing full inspection of adult belt

both n/s & o/s rear lower suspension arm bushs worn.

n/s/f lower wish bone bush split

n/s/f tyre valve perished

Child seat fitted not allowing full inspection of adult belt

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)