MOT Status
ExpiredMileage
116,597 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Suspension arm damaged and seriously weakened Trailing arm (5.3.3 (b) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Fuel hose deteriorated (6.1.3 (c) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Headlamp lens slightly defective Both sides. (4.1.1 (b) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Front Headlamp lens slightly defective Both sides. (4.1.1 (b) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Exhaust mounting defective (6.1.2 (a))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Headlamp aim too high (4.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Exhaust mounting defective (6.1.2 (a))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
injector leaking
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
injector leaking
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
fuel filler neck very rusty
slight injector blow
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Parking brake lever defective so that it cannot be satisfactorily operated (1.1.6 (d))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
2 front tyres wearing on inner edge
Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
wiper condition poor.
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AK59 YVZ is a 2009 Mazda 3 in Blue with a 1,560cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2009 Mazda 3 models, the average MOT pass rate is 76.2% with a typical mileage of 67,384 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying AK59 YVZ, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 17 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AK59 YVZ?
You can check the full history of AK59 YVZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AK59 YVZ registered?
AK59 YVZ is a 2009 Mazda 3, first registered on 30 September 2009.
Is AK59 YVZ safe to buy?
The MOT history for AK59 YVZ shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AK59 YVZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AK59 YVZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.