2012 Peugeot 208

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension arm damaged and seriously weakened (5.3.3 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Exhaust mounting defective centre mount rubber broken (6.1.2 (a))

Exhaust silencer slightly loose centre mount missing (8.1.1 (b) (i))

Nearside Rear Nail in tyre ()

Nearside Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Tyre worn close to legal limit/worn on edge ALL 4 195/55/16 (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge 195/65x15 (5.2.3 (e))

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

front tyres close to limit

Both front tyres are worn on the edges & getting close to the legal limit

Engine covers, under trays & sill covers are fitted thus not allowing full inspection

Hand brake has little reserve travel left

Not able to check rear seat belts as child seats are fitted

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases front cat & Flexi pipe (6.1.2 (a))

Exhaust silencer insecure rear mount is broken (8.1.1 (b) (i))

Exhaust system insecure front mounts are broken off (6.1.2 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Both front tyres are worn on the edges & getting close to the legal limit

Engine covers, under trays & sill covers are fitted thus not allowing full inspection

Hand brake has little reserve travel left

Not able to check rear seat belts as child seats are fitted

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective Hangers broken still supported (6.1.2 (a))

Offside Rear Tyre slightly damaged/cracking or perishing Perished (5.2.3 (d) (ii))

Engine MIL inoperative or indicates a malfunction Light on (8.2.1.2 (h))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective Hangers broken still supported (6.1.2 (a))

Offside Rear Tyre slightly damaged/cracking or perishing Perished (5.2.3 (d) (ii))

Both rear tyres slightly perished

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened Inner surface (3.5.1i)

Front exhaust hanger broken but system still supported

Front brake disc worn, pitted or scored, but not seriously weakened both sides on inner face. (3.5.1i)

Front exhaust hanger bracket adrift (still secure).

front tyre treads approaching minimum depth indicators.