2002 Peugeot 206

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

petrol tank bracket corroded

Nearside Front Front constant velocity joint is insecure (2.5.C.1b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear registration plate insecure (6.3.1b)

front brake application uneven (3.7.B.2)

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both rear bump stops missing

rear brakes imbalanced 20%

rear silencer hanger repaired with wire

slight play in offside inner rack joint

various oil leaks

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp aim too high and too far to the left. (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp aim too high (1.8)

Offside Rear wheel bearing has excessive play (2.6.2)

Offside Stop lamp not working (1.2.1b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both rear bump stops missing

rear brakes imbalanced 20%

rear silencer hanger repaired with wire

slight play in offside inner rack joint

various oil leaks

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Oil leak

Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front discs showing wear

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside rear brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front discs showing wear

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2)

Nearside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2)

Offside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Registration plate lamp not working (1.1.C.1d)

Brake load sensing valve linkage stiff (3.6.E.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

screen chipped on o/s/f top area - out of swept volume area at present.n/s/f lower wishbone rear bush starting to split