MOT Status
ExpiredMileage
116,783 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Windscreen wiper blade defective both (3.4 (b) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Offside Front Direction indicator not working (4.4.1 (a) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Brake pipe likely to become detached or damaged allowing flexi hose to rub on suspension arm (1.1.11 (d) (ii))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Windscreen washer not working (3.5 (a))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Play in steering rack inner joint(s) ()
Nearside Rear Suspension component mounting prescribed area is inadequately repaired floor (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired wheel arch (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Play in steering rack inner joint(s) ()
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Play in steering rack inner joint(s) ()
Oil leak, but not excessive (8.4.1 (a) (i))
Electrical wiring insecure and connectors likely to become disconnected (4.11 (a) (ii))
Front Anti-roll bar pin or bush excessively worn both (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Side repeater not working (4.4.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks (4.11 (c) (iii)) DANGEROUS
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Electrical wiring inadequately secured (4.11 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Rear central stop lamp not working
Nearside Front Anti-roll bar linkage ball joint excessively worn drop link (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt drop link (5.3.4 (b) (ii))
Offside Front Brake pipe excessively corroded inner arch (1.1.11 (c))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Tyre has ply or cords exposed due to cracking of the structure (5.2.3 (d) (ii)) DANGEROUS
Central Rear central stop lamp not working
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Central Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Nail in tyre ()
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Central Stop lamp not working (1.2.1b)
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear brake caliper securing device missing (3.5.1j)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust heat shield insecure
Nearside Rear Outer Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)
Offside Rear tyre worn on inner edge
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance (1.2.1d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Side repeater incorrect colour (1.4.A.2f)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Service brake: efficiency below requirements (3.7.B.7)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
How Reliable is the BMW 3 Series?
Based on 12,840,406 MOT tests across 1,004,285 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ANZ 4854 is a 2000 BMW 3 Series in Grey with a 1,951cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 45%.
Across all 2000 BMW 3 Series models, the average MOT pass rate is 68.6% with a typical mileage of 99,282 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 3 Series fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 485,475 recorded failures. If you're considering buying ANZ 4854, it's worth having these areas checked by a mechanic before committing.
The BMW 3 Series typically stays on UK roads for around 37 years. At 26 years old, this BMW 3 Series is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of ANZ 4854?
You can check the full history of ANZ 4854 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ANZ 4854 registered?
ANZ 4854 is a 2000 BMW 3 Series, first registered on 1 October 2000.
Is ANZ 4854 safe to buy?
The MOT history for ANZ 4854 shows 20 tests with a 45% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ANZ 4854 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ANZ 4854. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.