2002 BMW 3 Series

Offside Rear Lower Suspension component mounting prescribed area damaged but not considered excessive outer sill (5.3.6 (a) (i))

corrosion to o/s/f wheel arch

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake hose slightly chafed both (1.1.12 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Lower Suspension component mounting prescribed area damaged but not considered excessive outer sill (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

corrosion to o/s/f wheel arch

n/s/f indicator lense missing

Brake pad(s) wearing thin both front and rear (1.1.13 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both sides worn on inner and outer edges only (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both sides corroded in places (1.1.11 (c))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Brake pad(s) wearing thin both front and rear (1.1.13 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both sides worn on inner and outer edges only (5.2.3 (e))

Nearside Front Headlamp aim too low and too far to the right. (4.1.2 (a))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both sides corroded in places (1.1.11 (c))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pipe corroded, covered in grease or other material both rears at flexi joint (1.1.11 (c))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

both front wheel arch liners insecure

All direction indicators incorrect colour (4.4.3 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake pipe corroded, covered in grease or other material both rears at flexi joint (1.1.11 (c))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

both front wheel arch liners insecure

Rear Direction indicator slightly discoloured (4.4.3 (a))

Electronic stability system warning lamp indicates a fault (3.4.1c)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside front brake binding (3.7.B.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Offside Suspension arm has excessive play in a ball joint (2.4.G.2)

Direction indicators slightly discoloured (1.4.A.2f)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

rear tyres well worn

Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)