2002 Honda CB600

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear wheel bearings have slight free play (2.4.A.2c)

Wheel alignment slightly misaligned. (2.5.1)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Front Brake disc(s) securing bolt(s) loose (3.2.A1g)

Rear reflector on motorcycle missing (1.4.1)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear suspension bush has slight free play (2.4.A2a(i))

Drive chain slightly loose (6.2.1d)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front position lamp missing (1.1.1a)

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too high (1.6)

Nearside Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Drive chain slightly loose (6.2.1d)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Exhaust noisy (7.1.2)

Steering headbearing has slight free play (2.2.2)

r/h front engine bolt loose

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Front Headlamp deteriorated and function impaired (1.2.3a)

Front Horn not working (1.7.3a)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)