2002 Aprilia RS

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Rear suspension bush has excessive free play (2.4.A2a(i))

Dipped head lamp not very bright

Front brake lever low on handle bar

Front tyre perished on side walls

Front wheel bearings are slightly rough (2.3.5b)

Indicator switch stiff

Lower rear suspension and shock bushes worn and swivel

Rear Brake pedal pivots slightly worn (3.1.3a)

Drive chain excessively tight (6.2.1d)

Front Brake hose excessively chafed (3.2.B3a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Dipped head lamp not very bright

Front tyre perished on side walls

Front wheel bearings are slightly rough (2.3.5b)

Indicator switch stiff

Lower rear suspension and shock bushes worn and swivel

Rear Brake pedal pivots slightly worn (3.1.3a)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Headlamp aim too high and too far to the left. (1.6)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp missing (1.3.3a)

Drive chain slightly loose (6.2.1d)

Rear suspension bush has slight free play (2.4.A2a(i))

Front Brake hose slightly chafed (3.2.B3a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear suspension bush has slight free play (2.4.A2a(i))

Headlamp aim too low (1.6)

Front Brake hose slightly chafed (3.2.B3a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))