2003 Suzuki Alto

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner Sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner Sill (5.3.6 (a) (i))

Offside Rear Tyre Valve Trapped by Wheel Cover

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill and Floorpan (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill and Floorpan (5.3.6 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner Sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner Sill (5.3.6 (a) (i))

Offside Rear Tyre Valve Trapped by Wheel Cover

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Seat belt anchorage prescribed area is excessively corroded by jacking point (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside front brake binding (3.7.B.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan (6.1.B.2)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point (6.1.B.2)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan (6.1.B.2)

Offside front brake binding (3.7.B.1)

Rear Exhaust system not adequately supported support broken (7.1.1)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Suspension component mounting prescribed area is excessively corroded floor pan (2.4.A.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside front brake binding (3.7.B.1)

Rear Brake pipe excessively corroded At rear valve (3.6.B.2c)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

rear brake binding (3.7.B.1) DANGEROUS

Brakes imbalanced across an axle (3.7.B.5b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front rear brake binding (3.7.B.1)

Nearside Rear rear brake binding (3.7.B.1)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Front rear brake binding (3.7.B.1)

Service brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

rear wheels stiff to turn

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

rear wheels stiff to turn

Exhaust deteriorated

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside front brake binding (3.7.B.1)

Offside front brake binding (3.7.B.1)

Exhaust deteriorated

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing

Front Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)