MOT Status
ExpiredMileage
81,281 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated slightly loose on housing (6.1.7 (g) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Front Brake hose slightly chafed (1.1.12 (b) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside front brake binding (3.7.B.1)
front brake application uneven (3.7.B.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Tyre worn close to the legal limit worn on edges (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Brake pipe slightly corroded both front to rear (3.6.B.2c)
nearside rear and offside front tyre valves perished
Offside Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear fog lamp not working (1.3.2b)
Offside front brake binding (3.7.B.1)
Windscreen washer provides insufficient washer liquid fluid low (8.2.3)
Offside Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)
Spare tyre defective ()
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear coil spring broken (2.4.C.1a)
Offside Front Outer Front constant velocity joint is insecure inner gaitor clip. (2.5.C.1b)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Engine Management Light Present.
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside front brake recording little or no effort (3.7.B.5a)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
front brake application uneven (3.7.B.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
engine mangament lamp on
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Anti-roll bar synthetic mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AO03 YJG is a 2003 Ford Ka in Blue with a 1,599cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying AO03 YJG, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AO03 YJG?
You can check the full history of AO03 YJG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AO03 YJG registered?
AO03 YJG is a 2003 Ford Ka, first registered on 30 May 2003.
Is AO03 YJG safe to buy?
The MOT history for AO03 YJG shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AO03 YJG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AO03 YJG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.