2004 Skoda Fabia

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Nearside Rear Position lamp showing white light to the rear Lens broken (4.2.3 (a) (ii))

Offside Headlamp aim too low Head lamp lose (4.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Play in n/s steering joint

All suspension components corroded

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

All suspension components corroded

Offside Rear Tyre worn close to legal limit/worn on edge cracked and perished on tread (5.2.3 (e))

Seat belt anchorage prescribed area is corroded but not considered excessive corrosion to both outer sills (7.1.1 (a) (i))

Nearside Stop lamp(s) showing white light to the rear lamp lens damaged (4.3.3 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge cracked and perished on tread (5.2.3 (e))

Seat belt anchorage prescribed area is corroded but not considered excessive corrosion to both outer sills (7.1.1 (a) (i))

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Brake servo vacuum pipe deteriorated (3.6.C.1b)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Seat belt retracting mechanism defective (5.2.5b)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush (2.4.G.2)

Nearside Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Odd size tyres. B/F

Under trays fitted

Nearside Ball joint has excessive play RACK END (2.2.B.1f)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Odd size tyres. B/F

Under trays fitted

cut to side wall of offside front tyre cords not exposed

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Braking system leaking at cylinder (3.6.A.1)

Offside Stop lamp not working (1.2.1b)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

cut to side wall of offside front tyre cords not exposed

handbrake seizeing

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Registration plate lamp not working (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

handbrake seizeing

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both rear shock absorber dus covers detached

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)