2004 MG ZS

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Fuel Pipe/s corroded ()

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Rear Fuel Pipe/s corroded ()

Front Windscreen wiper blade defective (3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Headlamp insecure (4.1.1 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Windscreen wiper blade defective (3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Both Front Inner Sills (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Both Rear Inner Sills (6.1.1 (c) (i))

Nearside Rear Fuel Pipe/s corroded ()

Body panel insecure Front Grill (6.2.1 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Both Front Inner Sills (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Both Rear Inner Sills (6.1.1 (c) (i))

Nearside Rear Fuel Pipe/s corroded ()

Windscreen wiper blade defective Both front (3.4 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

both front floors slightly corroded

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

both front floors corroding

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

both front floors corroding

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

both front floors corroding

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

both front floors corroding

both front floors corroding

both front floors corroding

Offside Front Anti-lock braking system component excessively damaged sensor ring (3.4.2)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside rear brake binding (3.7.B.1)

both front floors corroding

both front floors corroding

Offside Front inner wing slightly corroded

both front floor and jacking points corroded but ok at time of test

both front floors corroding

visible pattern only on inner edge of offside rear tyre

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

both front floors corroding

visible pattern only on inner edge of offside rear tyre

both rear tyres worn on inner edges

Nearside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

exhaust back box corroded