2005 Toyota RAV4

Oil leak, but not excessive gearbox pan (8.4.1 (a) (i))

Oil leak, but not excessive sump (8.4.1 (a) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing suspension turret (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger to subframe (6.1.1 (c) (i))

Nearside Rear Floor excessively deteriorated boot floor (6.2.4 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i))

Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner sill not seam welded (6.1.1 (d) (i))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing suspension turret (6.1.1 (c) (i))

Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced outrigger to subframe (6.1.1 (d) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Outer Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS

Oil leak, but not excessive gearbox pan (8.4.1 (a) (i))

Oil leak, but not excessive sump (8.4.1 (a) (i))

Car is undersealed

Brake pedal has insufficient reserve travel (1.1.2 (a))

Central Seat belt missing seat belt clip (7.1.2 (a))

Emissions unable to be completed exhaust leak at rear (8.2.1.2 (d))

Headlamp aim projected beam image is obviously incorrect both fronts (4.1.2 (c))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger and offside front (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced shocker top (6.1.1 (c) (i))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced shocker top (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills and inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i))

ALL UNDERBODY RUSTY

SLIGHT BLOW ON BACK BOX

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

UNDERBODY AN CROSSMEMBER SLIGHT RUST

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced NEAR BULK HEAD (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER AND OUTER SILL MARKED IN CHALK (5.3.6 (a) (i))

UNDERBODY AN CROSSMEMBER SLIGHT RUST

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Outer Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge 2mm in centre (5.2.3 (e))

Nearside Brake pipe corroded, covered in grease or other material front to rear brake hose (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear brake hose (1.1.11 (c))

Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit And offside (4.1.E.1)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Rear coil spring broken (2.4.C.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

all brake pads getting low

brake fulid level low