MOT Status
ExpiredMileage
112,340 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Inner Body has slight corrosion sill (6.1.B.2)
Offside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
Offside Inner Body has slight corrosion sill (6.1.B.2)
Offside Outer Body has slight corrosion sill (6.1.B.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
nearside front bumper damaged
offside front tyre worn bold on edges
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Stop lamp not working (1.2.1b)
Rear fog lamp not working (1.3.2b)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Inner Body has slight corrosion sill (6.1.B.2)
Offside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
Offside Inner Body has slight corrosion sill (6.1.B.2)
Offside Outer Body has slight corrosion sill (6.1.B.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
nearside front bumper damaged
offside front tyre worn bold on edges
Front bumper has damage
Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sills (5.2.6)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sills (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sills (5.2.6)
Offside Suspension component mounting prescribed area is corroded but not considered excessive sills (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded end sill and inner arch sill (2.4.A.3)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
front brake application uneven (3.7.B.2)
Front bumper has damage
Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sills (5.2.6)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sills (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sills (5.2.6)
Offside Suspension component mounting prescribed area is corroded but not considered excessive sills (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
vehicle has various damage
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
vehicle has various damage
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
nearside headlamp aim not tested
Engine covers fitted obscuring some components in the engine bay
Nearside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Vehicle's internal headlight adjuster altered to recheck lights
cutin offside rear tyre not deep enough to reach cords/plys
Offside Front position lamp(s) not working (1.1.A.3b)
Offside front brake binding (3.7.B.1)
Engine covers fitted obscuring some components in the engine bay
Nearside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Vehicle's internal headlight adjuster altered to recheck lights
cutin offside rear tyre not deep enough to reach cords/plys
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AO05 LYT is a 2005 Mazda 6 in Silver with a 1,999cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying AO05 LYT, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AO05 LYT?
You can check the full history of AO05 LYT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AO05 LYT registered?
AO05 LYT is a 2005 Mazda 6, first registered on 8 April 2005.
Is AO05 LYT safe to buy?
The MOT history for AO05 LYT shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AO05 LYT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AO05 LYT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.