2005 Vauxhall Movano

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

steering operation slightly tight

general surface corrosion on underside

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

general corrosion on underside

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear handbrake slightly lower reading

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear handbrake reading low

Suspension component mounting repair covered in underseal various repairs heavily coated in underseal - unable to fully assess (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Jacking point (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Jacking point (5.3.6 (a) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear heat shield insecure

Brake performance not tested (1.2.1 (g))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Windscreen wiper does not clear the windscreen effectively Both (3.4 (b) (ii))

Brake pipe leaking on a hydraulic braking system Front to rear pipes (1.1.11 (b) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Jacking point (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Jacking point (5.3.6 (a) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear heat shield insecure

Central Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Brake pipe corroded, covered in grease or other material Front to Rear pipe (1.1.11 (c))

Nearside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive both (2.4.A.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Shock absorber casing damaged externally so the unit does not function (2.7.2a)

Nearside Rear Brake pipe excessively corroded to caliper (3.6.B.2c)

Offside Rear Brake pipe excessively corroded to caliper (3.6.B.2c)

Offside Rear Brake pipe excessively corroded to flexi (3.6.B.2c)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear brake caliper leaking (3.6.A.1)

Nearside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive both (2.4.A.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front registration plate insecure (6.3.1b)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

exhaust heatshield ins

Nearside Upper Rear position lamp(s) not working (1.1.A.3b)

Offside Upper Rear position lamp(s) not working (1.1.A.3b)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Upper Ball joint ball pin shank loose (2.2.B.1c)

Offside Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Parking brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Upper Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Parking brake: efficiency below requirements (3.7.B.7)