2006 Suzuki Swift

Front Coil spring corroded (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced front chassis and inner sills (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt both upper and lower (5.3.4 (b) (ii))

Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Coil spring corroded (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced front chassis and inner sills (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills lightly corroded (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt upper and lower (5.3.4 (b) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills lightly corroded (5.3.6 (a) (i))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Brake disc worn, pitted or scored, but not seriously weakened both front corroded around edges and in vents (1.1.14 (a) (ii))

Brake hose has slight corrosion to ferrule both rear (1.1.12 (f) (i))

Items removed from driver's view prior to test dash cam ()

Macpherson strut corroded but not seriously weakened both front at neck (5.3.3 (b) (i))

Nearside Rear shock absorber dust cover deteriorated

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive filter (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

windscreen has minor chip

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake disc worn, pitted or scored, but not seriously weakened both front corroded around edges and in vents (1.1.14 (a) (ii))

Brake hose has slight corrosion to ferrule both rear (1.1.12 (f) (i))

Items removed from driver's view prior to test dash cam ()

Macpherson strut corroded but not seriously weakened both front at neck (5.3.3 (b) (i))

Nearside Rear shock absorber dust cover deteriorated

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive filter (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

windscreen has minor chip

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

chip in windscreen

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Service brake excessively binding (1.2.1 (f))

Rear Exhaust silencer insecure (8.1.1 (b) (i))

Rear Service brake imbalanced across an axle (1.2.1 (b) (i))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

chip in windscreen

1/ o/s front exhaust mounting broken

1/ unable to check outer sills fully due to sill covers

3/ n/s front exhausnt mounting becoming corroded

4/ slight damage to windscreen

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

oil leak from oil filter

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear wheel bearing rough when rotated (2.6.1)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Rear brake slight bind

Offside Rear bump stop/shock gaiter excessively deteriorated

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

oil leak from oil filter

Nail in nearside rear tyre

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

oil leak from oil filter

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)