2008 Toyota Aygo

Emissions unable to be completed (8.2.1.2 (d))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, 3 x holes (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Front Headlamp has a product on the light source but not seriously reducing light output offside and nearside (4.1.4 (b))

Front offside and nearside tyres, tread 3mm

Offside Rear Position lamp insecure (4.2.1 (c) (i))

Rear axle and coil spring corroded

Central Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Position lamp insecure (4.2.1 (c) (i))

rear exhaust broken up inside

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Central Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Position lamp insecure (4.2.1 (c) (i))

rear exhaust broken up inside

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))

Front Brake disc worn, but not excessively inner faces (1.1.14 (a) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))

Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area marked (6.1.1 (c) (i))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area marked (6.1.1 (c) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))

Front Brake disc worn, but not excessively inner faces (1.1.14 (a) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))

Rear Axle deformed but serviceable (5.1.1 (a))

Rear Exhaust has a minor leak of exhaust gases FROM REAR JOIN (6.1.2 (a))

Rear Suspension component mounting prescribed area is corroded but not considered excessive BOTH SIDE ON REAR (5.3.6 (a) (i))

Horn not working (7.7 (a))

Rear Axle deformed but serviceable (5.1.1 (a))

Rear Exhaust has a minor leak of exhaust gases FROM REAR JOIN (6.1.2 (a))

Rear Suspension component mounting prescribed area is corroded but not considered excessive BOTH SIDE ON REAR (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing outer wall (5.2.3 (d) (ii))

front subframe and other parts of structure rusted

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill area marked (6.1.1 (c) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement Nearside and offside (5.3.4 (a) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Nearside and offside inner sills (6.1.1 (c) (i))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Bush starting to split (5.3.4 (a) (i))

Offside Front Tyre slightly damaged Outer side wall (5.2.3 (d) (ii))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Nearside rear lower effort - requires adjustment (1.2.1 (c))

Exhaust has a minor leak of exhaust gases Joint to rear silencer (6.1.2 (a))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Nearside and offside (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Nearside and offside (5.3.4 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Nearside and offside inner sills (6.2.2 (d) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security nearside and offside outer sills (6.2.2 (d) (i))

Rear Brake pipe corroded, covered in grease or other material Nearside and offside (1.1.11 (c))

Rear Service brake binding but not excessively Nearside and offside (1.2.1 (f))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Exhaust has a minor leak of exhaust gases Rear silencer joint to front pipe loose,(emission only just passed) (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush starting to deteriorate (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material corroding (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush starting to deteriorate (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material corroding (1.1.11 (c))

Front Tyre slightly damaged/cracking or perishing Nearside and offside on side walls (5.2.3 (d) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Oil leak

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside front brake binding (3.7.B.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)