2008 Seat Ibiza

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush de-bonding (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush de-bonding (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush de-bonding (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush de-bonding (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Exhaust has a major leak of exhaust gases joint(clamp corroded) (6.1.2 (a))

Emissions unable to be completed due to exhaust blow (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases flex section seperated (6.1.2 (a))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Exhaust has a major leak of exhaust gases joint (6.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nail in offside front tyre

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both rear tyres showing signs of age

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

brake discs worn but front pads only 50% worn and rear brake pads 20% worn .

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)