2009 Jaguar Xf

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Inner Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement both sides arms inner bushes (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security prescribed areas (6.2.2 (d) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust diesel particulate filter shows evidence of tampering. (8.2.2.1 (c))

Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour (8.2.2.2 (d))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak ()

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Rear position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Offside Rear Additional braking device wiring badly positioned (3.6.I.5)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

plastic under trays fitted all round

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

plastic under trays fitted all round

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Rear Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Under-trays fitted obscuring some underside components