2009 Kia Picanto

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced nearside and offside sills (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced sill end/ closing panel (6.1.1 (c) (i))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Offside Rear Service brake excessively fluctuating (1.2.1 (e))

Oil leaking excessively from engine (8.4.1 (a) (i))

Steering system excessively rough (2.1.1 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced nearside and offside sills (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced sill end/ closing panel (6.1.1 (c) (i))

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Tyre obviously under inflated all four (5.2.3 (l))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Rear axle rusty

Rear axle slightly rusty

Front Macpherson strut pin or bush worn but not resulting in excessive movement Both top mounts (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Macpherson strut pin or bush worn but not resulting in excessive movement Both top mounts (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Rear Brakes imbalanced across an axle SLOW ON AND OFF (1.2.1 (b) (i))

Windscreen wiper does not clear the windscreen effectively BOTH (3.4 (b) (ii))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear tyre worn on outer edge

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

nearside rear tyre worn on outer edge

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Front Exhaust system not adequately supported (7.1.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front position lamp(s) not working (1.1.A.3b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)