2010 Mazda 2

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Windscreen washer not working (3.5 (a))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Central Rear Rear axle heavily corroded (only just within limits on day of inspection)

Central Rear Wiper blade worn

General corrosion to underside of vehicle including suspension components, sills and subframe, brakes and brake pipes.

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Large hole in chassis rail behind coil spring (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Small hole inner sill area (6.2.2 (d) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Play in steering rack inner joint(s) ()

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Antifreeze level below minimum

Central Rear Rear axle heavily corroded (only just within limits on day of inspection)

Central Rear Wiper blade worn

General corrosion to underside of vehicle including suspension components, sills and subframe, brakes and brake pipes.

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Large hole in chassis rail behind coil spring (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Small hole inner sill area (6.2.2 (d) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Play in steering rack inner joint(s) ()

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive sill back and chassis leg (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive sill back and chassis leg (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive sill back and chassis leg (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive sill back and chassis leg (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen washer not working (3.5 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material mains both sides (1.1.11 (c))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive mounting points both sides (5.3.6 (a) (i))

Front Brake pad(s) wearing thin both sides (3.5.1g)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (axle) (2.4.G.1)

Rear Subframe mounting prescribed area is corroded but not considered excessive sill back area both sides (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front tyre cracking on inner wall

Rear both rear tyres cracking in tread