2015 Qingqi Qm

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Exhaust noisy (8.1.1 (a))

Spoke covers fitted obstructing view

Wheel alignment slightly misaligned (2.4 (a))

Headlamp aim too low (4.1.2 (a))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Spoke covers fitted obstructing view

Wheel alignment slightly misaligned (2.4 (a))

Chain guard missing ()

Front Brake binding but not excessively (1.2.1 (f))

Wheel alignment slightly misaligned (2.4 (a))

spoke covers fitted unable to check spoke condition

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Headlamp light source and lamp not compatible hid system fitted (4.1.4 (c))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Chain guard missing ()

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Wheel alignment slightly misaligned (2.4 (a))

spoke covers fitted unable to check spoke condition

Wheel alignment slightly misaligned (2.4 (a))

front brake reservior to master cylinder hose kinked

front wheel and rear wheels spokes covered not allowing full inspection

Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Wheel alignment slightly misaligned (2.4 (a))

front brake reservior to master cylinder hose kinked

front wheel and rear wheels spokes covered not allowing full inspection

Wheel alignment slightly misaligned (2.4 (a))

X3 of X4 of rear sprocket fixing studs are short.

front brake reservoir to master cylinder hose kinked

front suspension effort low

front wheel and back wheels spokes covered not allowing full inspection of spokes

Headlamp aim too low (4.1.2 (a))

Headlamp insecure (4.1.1 (c))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Stop lamp not working rear brake (4.3.1 (a) (ii))

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Wheel alignment slightly misaligned (2.4 (a))

X3 of X4 of rear sprocket fixing studs are short.

front brake reservoir to master cylinder hose kinked

front suspension effort low

front wheel and back wheels spokes covered not allowing full inspection of spokes

Rear reflector missing (4.8.2 (a) (ii))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake pad(s) contaminated (1.1.13 (b))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Front Shock absorber has a serious fluid leak Fork seal (5.3.2 (b))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake caliper insecurely mounted and braking performance affected Mounting worn (1.1.16 (c) (ii)) DANGEROUS

Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) DANGEROUS

Position lamp incorrect colour (4.2.3 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))