2018 Zontes Scorpion 125

Nearside Rear Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp aim unable to be tested (4.1.2 (b))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Hi beam warning light permanently illuminated

Nearside Rear Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Headlamp aim too low (4.1.2 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

lock nut missing front brake lever

Horn not working (7.7 (a))

Rear reflector missing (4.8.2 (a) (ii))

Headlamp aim too high (4.1.2 (a))

Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate lamp inoperative in the case of multiple lamps or light sources nearside registration plate inoperative (4.7.1 (b) (i))

Footrest insecure o/s footrest hanger broken (6.2.12 (a))

Front All direction indicators obviously incorrectly positioned spacing incorrect>too close (4.4.3 (a))

Front Motorcycle structure joining/attachment plate or fastening insecure front mudgaurd missing> acts as as fork brace (6.1.1 (b) (i))

Rear Exhaust system insecure bracket not suitable (6.1.2 (a))

Rear Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements too small (0.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))