2001 Suzuki Jimny

Front Inner Anti-roll bar pin or bush excessively worn 2 (5.3.4 (a) (i))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring seat (5.3.6 (a) (i))

Offside Front Fluid leak harmful to the environment or a risk to other road users hub (8.4.1 (a) (i))

Offside Front Service brake lagging in operation (1.2.1 (d))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Body mounting fixings insecure (6.2.2 (c) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Service brake effort inadequate at a wheel 2 (1.2.1 (a) (i))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Fuel Pipe/s corroded ()

Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing 2 (5.2.3 (d) (ii))

Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement 2 (5.3.4 (a) (i))

Fuel Pipe/s corroded ()

Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing 2 (5.2.3 (d) (ii))

Brake pipe excessively corroded 2 main (1.1.11 (c))

Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Rear Brake pipe excessively corroded 1 (1.1.11 (c))

Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement 2 (5.3.4 (a) (i))

Fuel Pipe/s corroded ()

Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing 2 (5.2.3 (d) (ii))

Brake pipe corroded, covered in grease or other material main x2 (1.1.11 (c))

Fuel Pipe/s corroded ()

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material axle x2 (1.1.11 (c))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material main x2 (1.1.11 (c))

Fuel Pipe/s corroded ()

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material axle x2 (1.1.11 (c))

Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Brake pipe corroded, covered in grease or other material both main (1.1.11 (c))

Front Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Fuel Pipe/s corroded ()

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Emissions not tested (8.2.1.2 (d))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material both main (1.1.11 (c))

Front Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))

Fuel Pipe/s corroded ()

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))

Brake pipe corroded, covered in grease or other material 2 main (1.1.11 (c))

Fuel Pipe/s corroded ()

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material 2 main (1.1.11 (c))

Fuel Pipe/s corroded ()

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Fuel Pipe/s corroded ()

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material x1 (1.1.11 (c))

rear exhaust in poor condition

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting x2 (6.2.2 (d) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Fuel Pipe/s corroded ()

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material x1 (1.1.11 (c))

rear exhaust in poor condition

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

rear tyres perished

rear tyres slightly perished

sill covers

sill covers

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

sill covers

Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

nsf tyre splitting and perished

windscreen chipped

Nearside Front front brake binding (3.7.B.1)

nsf tyre splitting and perished

windscreen chipped

Exhaust has part of the system slightly deteriorated (7.1.1a)

Centre Exhaust system not adequately supported (7.1.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Stub axle has slight vertical movement between stub axle and axle beam (2.5.A.1a)

o/s/f stub axle swivel ball joint corroded

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Stub axle has slight vertical movement between stub axle and axle beam (2.5.A.1a)

o/s/f stub axle swivel ball joint corroded

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Headlamp aim too high (1.8)

Nearside Front Steering pivot point has excessive play (2.2.B.1g)