2001 Nissan Micra

Brake pipe corroded, covered in grease or other material All brake pipes front to rear (1.1.11 (c))

Front Service brake binding but not excessively Nearside and offside (1.2.1 (f))

Front Suspension arm ball joint has slight play Nearside and offside (5.3.4 (a) (i))

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Coil spring corroded Nearside and offside (5.3.1 (b) (i))

Rear Shock absorbers light misting of oil or has limited damping effect Nearside and offside limited damping effect (5.3.2 (b))

Rear Suspension rod pin or bush worn but not resulting in excessive movement Nearside and offside (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material All brake pipes front to rear (1.1.11 (c))

Front Service brake binding but not excessively Nearside and offside (1.2.1 (f))

Front Suspension arm ball joint has slight play Nearside and offside (5.3.4 (a) (i))

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Coil spring corroded Nearside and offside (5.3.1 (b) (i))

Rear Shock absorbers light misting of oil or has limited damping effect Nearside and offside limited damping effect (5.3.2 (b))

Rear Suspension rod pin or bush worn but not resulting in excessive movement Nearside and offside (5.3.4 (a) (i))

corrosion of front lower cross member

Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

corrosion of front lower cross member

1. Outer sills starting to corrode. 2. Front chassis cross member starting to corrode. 3. Steel brake pipes at rear starting to corrode.

Rear foot brake efficiency has just met requirements.

Nearside Suspension component mounting prescribed area is excessively corroded inner sill backing at front (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded inner sill backing at rear (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded floor pan (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded inner sill backing at front (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded inner sill backing at rear (2.4.A.3)

1. Outer sills starting to corrode. 2. Front chassis cross member starting to corrode. 3. Steel brake pipes at rear starting to corrode.

Rear foot brake efficiency has just met requirements.

Rear registration plate deteriorated (6.3.1d)

Nearside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6) DANGEROUS

Offside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6) DANGEROUS

front discs worn

general corosion under vehicle

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

air bag light on

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)