2003 Fiat Doblo

Headlamp lens slightly defective both front (4.1.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis and cross member (5.3.6 (a) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner outer sill (6.1.1 (c) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced cross member and out riggers (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Front Headlamp has a product on the light source so that the light output is severely reduced both (1.7.5a)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Tyre tread depth below requirements of 1.6mm wear on inner edge and inner sidewall perished (4.1.E.1)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive Spring anchor (2.4.A.3)

Engine covers fitted obscuring some components in the engine bay

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front coil spring corroded (2.4.C.1b)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Engine covers fitted obscuring some components in the engine bay

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Under-trays fitted obscuring some underside components

both rear bump stops missing

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Inner Rear Electrical wiring insecure (1.9.2a)

Offside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Engine covers fitted obscuring some components in the engine bay

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

both rear bump stops missing

Engine covers fitted obscuring some components in the engine bay

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Under-trays fitted obscuring some underside components

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Engine covers fitted obscuring some components in the engine bay

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Outer Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Inner Front Ball joint has slight play (2.2.B.1f)

Offside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

clutch & brake pedal rubbers part worn

front brake discs worn (seriously weakened)

rear suspension bump stops missing

Nearside Outer Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front brake discs slightly worn (not seriously weakend)

washer bottle cap missing

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Outer Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front brake discs slightly worn (not seriously weakend)

washer bottle cap missing

Washer bottle - cap missing

Brake fluid tested - PASS

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Drag link end ball joint has slight play (2.2.B.1f)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leval - Ok

Brake Fluid Test - PASS

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)