2003 Toyota Yaris

Front Anti-roll bar pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))

centre exhaust silencer deteriorated

front suspension legs rusty

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i))

1 front exhaust bracket broken

Front Anti-roll bar pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))

centre exhaust silencer deteriorated

front suspension legs rusty

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Central Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))

high level stop light not working

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

front exhaust silencer becoming deteriorated

high level stop light not working

rear tyres becoming perished on outer sidewalls

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

front exhaust silencer becoming deteriorated

high level stop light not working

rear tyres becoming perished on outer sidewalls

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

rear tyres slightly perished on outer sidewalls

Brake pipe excessively corroded rear section of offside front to rear (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end capping (5.3.6 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

rear tyres slightly perished on outer sidewalls

Brake pipe slightly corroded rear section of offside front to rear (3.6.B.2c)

Offside Brake pipe slightly corroded front to rear at rear (3.6.B.2c)

Offside Rear Outer Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Registration plate lamp insecure and not working (1.1.C.1c)

Offside Brake pipe slightly corroded front to rear at rear (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Brake pipe slightly corroded front to rear at rear (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

1 nearside washer jet blocked

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

rattle on rear exhaust flexi joint

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

n/s/f o/s/f tyre wear outside edge

front tyres wearing on edges