2005 Ford Ka

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Exhaust flexi casing deteriorated

Front Power steering pipe/hose slightly corroded Along cross member (2.1.5 (g) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (Both arms) (5.3.4 (a) (i))

Nearside Front Brake flexi hose mounting corroded

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Close to suspension top mounting (5.3.6 (a) (i))

Rear Axle bushes worn (Both)

Rear Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under wheel arch (5.3.6 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust flexi casing deteriorated

Front Suspension arm pin or bush worn but not resulting in excessive movement Both rear bushes (5.3.4 (a) (i))

Nearside Front Brake pipe flexi mounting corroded

Nearside Front Lower Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Bumper mounting corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Both (5.1.2 (b) (i))

Rear Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wishbone mount (5.3.6 (a) (i))

rear wiper blade split

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded lower front arm mount. (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill/axle mount (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit 2mm worn on insides. (4.1.E.1)

Offside Front Tyre worn close to the legal limit 2mm worn on insides. (4.1.E.1)

noise from offside rear wheel/brake in reverse.

Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

Nearside Front coil spring broken (2.4.C.1a)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (5.2.6)

noise from offside rear wheel when in reverse.

Nearside Rear Direction indicators not working (1.4.A.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front coil spring fractured (2.4.C.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

all four tyres perrished..

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)