2006 Fiat Panda

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Brake lever has insufficient reserve travel (1.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at rear (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Brake lever has insufficient reserve travel (1.1.2 (a))

Electronic power steering warning lamp indicates a system malfunction (2.6 (a))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength round spring mount (5.3.6 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Nearside Front Upper Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Items removed from driver's view prior to test

engine noisy, corrosion to underside components, eml on

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

rust forming on exhaust

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

rust forming on exhaust

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Fuel system component leaking (7.2.3)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Headlamp aim too low (1.8)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front top supension mounts noisy, no play or stiffness found.

Rear exhaust silencer delaminating

Front suspension leg top mounts noisy, no play or stiffness found.

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)