MOT Status
ExpiredMileage
94,574 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill area (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch area (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear of frame (5.3.6 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch area (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive rear of frame (5.3.6 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill end (6.2.2 (d) (i))
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced rear of front chassis leg (6.1.1 (c) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Outer Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Near side and off side (2.4.G.2)
Rear Tyres have slight age related cracking
Nearside Rear Tyre aged cracking
Offside Rear Tyre aged cracking
Offside Stop lamp not working (1.2.1b)
Battery light on dash
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring broken (2.4.C.1a) DANGEROUS
Battery light on dash
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc's corroded and lipped
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Tyre worn close to the legal limit (4.1.E.1)
both front tyres worn on inner and outter edges
Nearside Stop lamp not working (1.2.1b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AO56 VST is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying AO56 VST, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AO56 VST?
You can check the full history of AO56 VST by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AO56 VST registered?
AO56 VST is a 2006 Ford Ka, first registered on 10 November 2006.
Is AO56 VST safe to buy?
The MOT history for AO56 VST shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AO56 VST have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AO56 VST. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.