2007 Fiat Ducato

Exhaust mounting defective all exhaust box - rubber hangers - perished/snapped (6.1.2 (a))

Front Tyre slightly damaged/cracking or perishing both sides - perished/splitting - outer sidewall and tread edge area (5.2.3 (d) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced rearward inner wheel arch - corroded/holed (6.1.1 (c) (i))

Offside Front washer jet spray - low on screen area

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Leaf spring anchor bracket corroded but not seriously weakened both sides - rearward brackets (5.3.1 (b) (i))

Rear Leaf spring has slight wear in a shackle pin and/or bush both sides - forward/rearward spring bush (5.3.4 (a) (i))

Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning high level (4.3.1 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security main chassis/ all cross members/under floor area (6.2.2 (d) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill/step area (6.1.1 (c) (i))

Exhaust mounting defective all exhaust box - rubber hangers - perished/snapped (6.1.2 (a))

Front Tyre slightly damaged/cracking or perishing both sides - perished/splitting - outer sidewall and tread edge area (5.2.3 (d) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced rearward inner wheel arch - corroded/holed (6.1.1 (c) (i))

Offside Front washer jet spray - low on screen area

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Leaf spring anchor bracket corroded but not seriously weakened both sides - rearward brackets (5.3.1 (b) (i))

Rear Leaf spring has slight wear in a shackle pin and/or bush both sides - forward/rearward spring bush (5.3.4 (a) (i))

Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning high level (4.3.1 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security main chassis/ all cross members/under floor area (6.2.2 (d) (i))

Exhaust mounting defective exhaust box - all hangers (6.1.2 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear park brake - outer cable damaged

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Leaf spring shackle bracket corroded but not seriously weakened both sides - rearward brackets (5.3.1 (b) (i))

Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning high level (4.3.1 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced 2nd last - crossmember (6.1.1 (c) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt gaiter split (2.1.3 (g) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area (6.1.1 (c) (i))

Exhaust mounting defective exhaust box - all hangers (6.1.2 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear park brake - outer cable damaged

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Leaf spring shackle bracket corroded but not seriously weakened both sides - rearward brackets (5.3.1 (b) (i))

Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning high level (4.3.1 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced 2nd last - crossmember (6.1.1 (c) (i))

Central Exhaust mounting defective all (6.1.2 (a))

Central exhaust outer casing loose

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Rear Brake cable damaged but not to excess (1.1.15 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Central Exhaust mounting defective all (6.1.2 (a))

Central exhaust outer casing loose

Front Coil spring corroded both (5.3.1 (b) (i))

Nearside Rear Brake cable damaged but not to excess (1.1.15 (a))

Exhaust mounting defective main exhaust box rubber mounts - perished/split (6.1.2 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Vehicle structure is corroded but structural rigidity is not significantly reduced front to rear - general corrosion (6.1.1 (c) (i))

Exhaust mounting defective exhaust box rubber mounts - all - split/perished (6.1.2 (a))

exhaust showing deterioration

tow ball removed at time of test

under side of vehicle showing deterioration

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Seat belt anchorage prescribed area is inadequately repaired door step (7.1.1 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

exhaust showing deterioration

tow ball removed at time of test

under side of vehicle showing deterioration

Exhaust mounting defective several (6.1.2 (a))

Rear exhaust corroded

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust mounting defective several (6.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear exhaust corroded

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

rear exhaust box corroded and slight blow

Rear exhaust corroded (back box)

Horn not working (1.6.2a)

Offside Steering rack gaiter split (2.2.D.2d)

Rear exhaust corroded (back box)

Nearside Front Lower Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

Nearside Front Lower Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

rear exhaust silencer deteriorated but not leaking at the time of test

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Parking brake: efficiency below requirements (3.7.B.7)

Brake pad(s) wearing thin both sides rear (3.5.1g)

Nearside Front Lower Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

Nearside Front Lower Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

rear exhaust silencer deteriorated but not leaking at the time of test

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Offside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

engine management light on dash

hand brake cable clip broken

n.s.r tyre is perished on the side walls

oil leak on engine

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear fog lamp not working (1.3.2b)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Registration plate lamp not working (1.1.C.1d)

Engine warning lamp on

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Engine warning lamp on

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Registration plate lamp not working (1.1.C.1d)

engine management light on

exhaust centre box outer skin corroded

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Stop lamp adversely affected by the operation of another lamp (1.2.1f)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

both front tyres on 3/4mm

engine management light on

exhaust centre box outer skin corroded

o/s/r tyre perished

front and rear pads wearing thin

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

front and rear pads wearing thin