2008 Ford Transit Connect

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Central Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Outer Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))

Offside Front Outer Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps (4.1.3 (b))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Brake pipe excessively corroded front to rear at fuel tank (3.6.B.2c)

Nearside Rear Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside rear brake fluctuating, but not excessively (3.7.B.3)

Offside rear brake fluctuating, but not excessively (3.7.B.3)

1x front exhaust rubber split

Offside Front Brake pipe slightly corroded (3.6.B.2c)

high level stop lamp not working

oil leaks

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

1x front exhaust rubber split

Offside Front Brake pipe slightly corroded (3.6.B.2c)

high level stop lamp not working

oil leaks

high level stop lamp not working

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside front brake binding (3.7.B.1)

Power steering component(s) leaking (2.3.3b)

front brake application uneven (3.7.B.2)

high level stop lamp not working

power steering fluid level low

high level stop lamp not working