2008 Toyota Aygo

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive also has repairs (5.3.6 (a) (i))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases mid and rear (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material n/s & o/s main (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Brake lever has insufficient reserve travel (1.1.2 (a))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s & o/s outer sills (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material n/s & o/s main (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Brake pipe corroded, covered in grease or other material n/s & o/s main (1.1.11 (c))

Emissions not tested because of exhaust leak (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases tailbox joint (6.1.2 (a))

Front Brake disc significantly and obviously worn n/s & o/s (1.1.14 (a) (i))

Front Exhaust system insecure hanger broken (6.1.2 (a))

Front Service brake excessively fluctuating n/s & o/s (1.2.1 (e))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Brake pipe excessively corroded n/s & o/s (1.1.11 (c))

Rear Undertray insecure (8.1.1 (b) (i))

Brake pipe corroded, covered in grease or other material n/s & o/s main (1.1.11 (c))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Brake pipe excessively corroded front to n/s/r flex hose (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Offside rear brake binding (3.7.B.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

rear brake binding (3.7.B.1)

excess handbrake lever freeplay

Front Wiper Torn

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

O/S/R Brakes Starting To bind

front 0/s n/s discs worn/slight det f/r susp r/bushes/exhaust rusty/MOUNTINGS ROTTEN MONITOR

Exhaust has part of the system slightly deteriorated (7.1.1a)

front number plate starting to discolour