2009 Kia Picanto

Brake pipe corroded, covered in grease or other material all rears (1.1.11 (c))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Brake pipe corroded, covered in grease or other material all rears (1.1.11 (c))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material all rears (1.1.11 (c))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material all rears (1.1.11 (c))

Offside Rear tyre wearing inner edge

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

sump rusty

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material all rears (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear tyre wearing inner edge

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

sump rusty

Brake pipe corroded, covered in grease or other material all rears (1.1.11 (c))

Offside Front tyre wearing inner edge

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Brake pipe corroded, covered in grease or other material all rears (1.1.11 (c))

Offside Front tyre wearing inner edge

Brake pipe corroded, covered in grease or other material all rears (1.1.11 (c))

Emissions not tested (8.2.1.2 (d))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Brake pipe corroded, covered in grease or other material all rears (1.1.11 (c))

Brake pipe corroded, covered in grease or other material all rears (1.1.11 (c))

Brake pipe corroded, covered in grease or other material ALL REARS (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Brake pipe corroded, covered in grease or other material ALL REARS (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material all pipes greased (1.1.11 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases mid section (6.1.2 (a))

Nearside Front Anti-lock braking system component excessively damaged reluctor ring broken (1.6 (e))

Rear Brake pipe corroded, covered in grease or other material all pipes greased (1.1.11 (c))

Exhaust has a minor leak of exhaust gases rear silencer at joint,pinhole (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint lower balljoint (2.4.G.2)

Front Downpipe mount corroded but still supported.

All tyres cracking in treads and fronts wearing thin on edges.

Both fronts and rear wiper inserts split.

Front Exhaust system not adequately supported (7.1.1)