2012 Honda Cbr 125 Rw-b

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust silencer slightly loose rear silencer heat shield loose (8.1.1 (b) (i))

Front Brake component insecure brake hose insecure (1.1.21 (c))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust silencer slightly loose rear silencer heat shield loose (8.1.1 (b) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain sprocket worn to excess Front & Rear sprockets. (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Stop lamp remains on when the brakes are released Rear brake intermittently making brake light remain on after brake being applied and released. (4.3.2 (a) (iii)) DANGEROUS

Chain fouling against gear lever.

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) close to minimum limit Inner pad very close to 1.0mm limit. (1.1.13 (a))

Gear lever bent, pivot point & linkages all badly worn.

Rear Brake pivot worn, but not excessively (1.1.15 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear brake lever fouling against rear exhaust heat shield when fully released but not restricting brake movement.

Steering movement slightly 'notchy' (2.2.1a)

o/s mirror insecure

Footrest missing passenger (6.2.1a)

Steering movement slightly 'notchy' (2.2.1a)

o/s mirror insecure

Drive chain excessively loose (6.2.1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Offside Rear Footrest insecure (6.2.1a)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))