MOT Status
ExpiredMileage
111,003 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Position lamp not working (4.2.1 (a))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
1/ front brake discs corroded on inside edge
2/ front brake pads becoming worn
4/ o/s front tyre and n/s front tyre worn on outside edge
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded at center (7.1.1 (a) (i))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill backing (5.3.6 (a) (i))
Offside Side repeater incorrect colour (4.4.3 (a))
1/ front brake discs corroded on inside edge
2/ front brake pads becoming worn
3/ slight damage to n/s front flexe brake hose
4/ o/s front tyre and n/s front tyre worn on outside edge
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Front Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Stop lamp not working (1.2.1b)
Registration plate lamp not working (1.1.C.1d)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Parking brake lever has little reserve travel (3.1.6b)
Under vehicle general corrosion
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded Sill (5.2.6)
Offside Stop lamp not working (1.2.1b)
Parking brake lever has little reserve travel (3.1.6b)
Under vehicle general corrosion
Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
front brake pads low
Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
o/s/r tyre sidewall in poor condition
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
o/s/r tyre sidewall in poor condition
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust system not adequately supported (7.1.1)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear rear brake binding (3.7.B.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both front wipers smearing
rear exhaust box rubber hanger split
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Stop lamp not working (1.2.1b)
Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Rear rear brake binding (3.7.B.1)
Nearside Rear Direction indicator affected by the operation of another lamp (1.4.A.2h)
Nearside Rear Stop lamp slightly affected by the operation of another lamp (1.2.1f)
Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Direction indicator affected by the operation of another lamp (1.4.A.2h)
Nearside Rear Stop lamp slightly affected by the operation of another lamp (1.2.1f)
Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AP02 BNO is a 2002 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 53.8%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying AP02 BNO, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AP02 BNO?
You can check the full history of AP02 BNO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AP02 BNO registered?
AP02 BNO is a 2002 Peugeot 206, first registered on 31 May 2002.
Is AP02 BNO safe to buy?
The MOT history for AP02 BNO shows 26 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AP02 BNO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AP02 BNO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.