MOT Status
ExpiredMileage
186,509 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear Rear fog lamp not working (4.5.1 (a) (ii))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Indicator switch inoperative (4.4.2 (a) (ii))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))
Offside Front Direction indicator not working (4.4.1 (a) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Central Front Exhaust mounting defective (6.1.2 (a))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Inner Drive shaft joint worn, but not excessively (6.1.7 (c) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Rear Exhaust system insecure box (6.1.2 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o s f chassis (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Inner Brake pipe excessively corroded (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Integral body structure is deformed but structural rigidity is not significantly reduced both outer sills (6.1.1 (a) (i))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Power steering component leaking (2.1.5 (a))
Nearside Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Integral body structure is deformed but structural rigidity is not significantly reduced both outer sills (6.1.1 (a) (i))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Power steering ram has slight seepage from a joint (2.1.5 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Inner Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pipe corroded, covered in grease or other material From load sensor valve. (1.1.11 (c))
Nearside Front Windscreen wiper blade insecure (8.2.2)
Nearside Rear Inner Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Inner Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Rear fog lamp not working (1.3.2b)
Rear Exhaust system not adequately supported (7.1.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front brake discs are rusty and wearing unevenly
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear fog lamp not working (1.3.2b)
Rear Brake pipe leaking (3.6.A.1) DANGEROUS
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Power steering ram(s) leaking from a failed component (2.3.3b)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front brake discs are rusty and wearing unevenly
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Power steering component(s) has slight seepage from a component (2.3.3b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
offside front tyre wearing inner edge
slight leak at power steering
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Headlamp aim too low (1.8)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc slightly pitted (3.5.1h)
Brake valve has an excessive discharge of oil (3.6.E.1)
front tyres worn on edges †front brake discs corroded †
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AP03 ZPV is a 2003 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying AP03 ZPV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AP03 ZPV?
You can check the full history of AP03 ZPV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AP03 ZPV registered?
AP03 ZPV is a 2003 Peugeot 206, first registered on 1 March 2003.
Is AP03 ZPV safe to buy?
The MOT history for AP03 ZPV shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AP03 ZPV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AP03 ZPV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.