2004 Lexus RX300

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

both rear backing plates badly corroded

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both inner faces (1.1.14 (a) (ii))

Fuel Pipe/s corroded Filler pipes ()

Rear Lower Suspension arm corroded but not seriously weakened Both forward Tie bars (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both inner faces (1.1.14 (a) (ii))

Fuel Pipe/s corroded Filler pipes ()

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Lower Suspension arm corroded but not seriously weakened Both forward Tie bars (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on edges (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge wearing inner edge (5.2.3 (e))

Offside Front Fluid leak harmful to the environment or a risk to other road users coolant leak (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge wearing on edges (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge wearing inner edge (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened both fronts (1.1.14 (a) (ii))

both front drive shaft boots inners leaking grease but preventing the ingress of dirt and they are secure

rear shock covers are broken ram exposed

rear subframe has corrosion

rear suspension components corroded

undertrays obscuring view

Nearside Rear Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened both fronts (1.1.14 (a) (ii))

both front drive shaft boots inners leaking grease but preventing the ingress of dirt and they are secure

coolant leak from radiator

rear shock covers are broken ram exposed

rear subframe has corrosion

rear suspension components corroded

undertrays obscuring view

Nearside door mirror fading,view to rear ok,just

Nearside Rear Registration plate lamp not working (1.1.C.1d)

all front/rear tyre treads worn low.

slight jacking damage to nearside / offside outer sill panels

both front tyres worn bald on inner shoulder.advise attention.

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Parking brake: efficiency below requirements (3.7.B.7)

both front tyres worn bald on inner shoulder.advise attention.

advisory.both rear tyres worn bald on inner shoulder.advise attention/renewal.

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)