2004 Ford Ka

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner chassis rail marked near subframe mount (6.2.2 (d) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill 2 areas marked (6.2.2 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Service brake effort inadequate at a wheel Nearside and offside (1.2.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

corrosion underside

engine warning lamp on

Nearside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill back (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill back (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Offside Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement advise replacement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis/sill back (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner wing (5.2.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis/sill back (2.4.A.3)

Oil leak ()

front brake pads worn

o/s/r tyre walls perrished

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement advise replacement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis/sill back (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner wing (5.2.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis/sill back (2.4.A.3)

Oil leak ()

front brake pads worn

o/s/r tyre walls perrished

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Brake hose twisted (3.6.B.4c)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust system not adequately supported (7.1.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Nearside Rear Road wheel slightly damaged (4.2.A.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake hose twisted (3.6.B.4c)

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Nearside Rear Road wheel slightly damaged (4.2.A.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear coil spring fractured (2.4.C.1a)

Offside Stop lamp not working (1.2.1b)

Offside Front coil spring fractured (2.4.C.1a) DANGEROUS

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

travel on brake pedal advise futher attention

front brake pads low

spare tyre flat

travel on brake pedal still has reserve

Brake pedal has insufficient reserve movement (3.3.A.5)

Brake pedal spongy (3.3.B.1b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Headlamp aim too low (1.8)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

offside front tyre wear on inner edge