2005 Honda CBR125R

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Clutch lever shortened (6.2.7 (b))

Exhaust noisy (8.1.1 (a))

Rear Brake binding but not excessively when lifted off ground (1.2.1 (f))

swing arm slightly corroded

Drive chain excessively tight (6.1.7 (k) (i))

Nearside Front Direction indicator missing (4.4.1 (a) (ii))

Nearside Front Footrest insecure (6.2.12 (a))

Rear Footrest missing (6.2.12 (a))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Clutch lever shortened (6.2.7 (b))

Exhaust noisy (8.1.1 (a))

Rear Brake binding but not excessively when lifted off ground (1.2.1 (f))

swing arm slightly corroded

Nearside Front Direction indicators not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Outer Brake pad(s) (sintered type) less than 1.0mm thick disc pad has dislodge from caliper (3.2A1f(ii)) DANGEROUS

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Steering headbearing has slight free play (2.2.2)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain worn to excess (6.2.1e)

Front Drive chain sprocket worn to excess (6.2.1e)

Nearside Front Direction indicator not working (1.5.1c)

Rear Drive chain sprocket worn to excess (6.2.1e)