MOT Status
ValidMileage
92,028 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive turret (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting (5.3.6 (a) (i))
Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive turret (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened N/S & O/S (1.1.14 (a) (ii))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Shock turret (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material N/S & O/S (1.1.11 (c))
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive N/S & O/S Axle mounting (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Shock turret (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mounting points (5.3.6 (a) (i))
Nearside Front Headlamp aim too far to the right (4.1.2 (a))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))
Offside Rear Exhaust silencer insecure (8.1.1 (b) (i))
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Shock turret (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mounting points (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive turret (5.3.6 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Exhaust mounting defective rusty/weak (6.1.2 (a))
Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake pipe slightly damaged (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive turret (5.3.6 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Rear Exhaust mounting defective rusty/weak (6.1.2 (a))
Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))
Nearside Front Brake pipe slightly damaged Brake line slightly bent. (1.1.11 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing Tyre slightly wearing on inner shoulder. (5.2.3 (d) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated lower control arm ball joint dust cover perishing but still preventing dirt/dust ingress. (5.3.4 (b) (i))
Offside Rear Outer Exhaust mounting defective rear exhaust silencer rear hanger corroded. (6.1.2 (a))
Rear Rear bumper outer corners on both sides not fully secure but bumper unlikely to become detached.
Rear Sub-frame pin or bush worn but not resulting in excessive movement Both rear sub frame bushes have slight wear (5.3.4 (a) (i))
Nearside Front Brake pipe slightly damaged (1.1.11 (c))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake pipe slightly damaged (1.1.11 (c))
Nearside Front Tyre slightly damaged (5.2.3 (d) (ii))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
all four tyres starting to wear and perrish
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
n/s/f tyre 4mm
o/s/f tyre 3mm
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Mazda 2?
Based on 1,902,862 MOT tests across 147,013 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AP05 LPU is a 2005 Mazda 2 in Blue with a 1,400cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 73.1%.
Across all 2005 Mazda 2 models, the average MOT pass rate is 76.4% with a typical mileage of 53,521 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 2 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 18,380 recorded failures. If you're considering buying AP05 LPU, it's worth having these areas checked by a mechanic before committing.
The Mazda 2 typically stays on UK roads for around 23 years. At 21 years old, this Mazda 2 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AP05 LPU?
You can check the full history of AP05 LPU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AP05 LPU registered?
AP05 LPU is a 2005 Mazda 2, first registered on 27 July 2005.
Is AP05 LPU safe to buy?
The MOT history for AP05 LPU shows 26 tests with a 73.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AP05 LPU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AP05 LPU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.