2005 Nissan Almera

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Exhaust system insecure Mounting broken (6.1.2 (a))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front exhaust shield insecure

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front exhaust shield insecure

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Front Windscreen washer not working (3.5 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

both front tyres wearing unevenly on inner edges

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits running at 9% (8.2.1.2 (a))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

both front tyres wearing unevenly on inner edges

Nearside Rear Tyre has ply or cords exposed inner sidewall & edge (4.1.D.1b)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear Tyre has ply or cords exposed inner edge (4.1.D.1b)

Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

front & rear tyres worn on edges

front tyres just pass

oil leaking from engine

oil leaking from power steering pipe

Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Nearside Headlamp not working on dipped beam (1.7.5a)

front & rear tyres worn on edges

front tyres just pass

oil leaking from engine

oil leaking from power steering pipe

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Battery insecure (1.9.1)

Headlamp aim too low (1.8)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

exhaust mountings corroded

Front Exhaust has a minor leak of exhaust gases (7.1.2)

both rear brake pipes corroded

Brakes imbalanced across an axle (3.7.B.5b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

both rear brake pipes corroded

drivers seat belt retracts very slowly

n/s/f brake binding slightly

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Inner Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

front brake application uneven (3.7.B.2)

front brakes release unevenly (3.7.B.4)

Front Brake pad(s) wearing thin (3.5.1g)

rear brake discs corroded

rear high level brake lamp inop

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

front brake pads 3/4 worn

pitting to rear brake discs ( unable to fully inspect rear inner brakepads without dismantling)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)