2006 Ford Focus

Power steering pump has slight seepage (2.1.5 (a))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Both Side (5.1.2 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Anti-roll bar linkage attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 205/55/16 (4.1.D.1a)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement arm rear bush (2.4.G.2)

Offside Rear Direction indicator not working (1.4.A.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp aim too low (1.8)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (4.1.E.2a)

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (4.1.E.2a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear tyres getting low and wearing on edges

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear tyres getting low and wearing on edges