2007 Ford Focus

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

both facing panels rusty

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin approx 4mm (1.1.13 (a) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to the legal limit low and bald inner edge.was on front original test. (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Nearside Front Seat belt cut sufficient to obstruct correct operation of the belt (5.2.2a) DANGEROUS

Nearside Front Seat belt has a cut which has significantly weakened the webbing (5.2.2a) DANGEROUS

Nearside Front Seat belt has a cut which has significantly weakened the webbing (5.2.2a) DANGEROUS

Nearside Front Tyre has ply or cords exposed inner edge (4.1.D.1b) DANGEROUS

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

n/s and o/s rear suspension link arm bushes splitting away from bonding

o/s/f lower arm bushes split away from bonding

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

n/s and o/s rear suspension link arm bushes splitting away from bonding

o/s/f lower arm bushes split away from bonding

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear indicators starting to show white light

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

rear indicators starting to show white light

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)