2007 Kia Sportage

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Steering box has seepage (2.1.1 (e) (i))

Offside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced suspention arm corroded/weakening (5.3.3 (b) (i))

Oil leak, but not excessive rear diff (8.4.1 (a) (i))

Rear Both rear tyres edges wearing out

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear diff slight oil leak

Steering box has seepage (2.1.1 (e) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Rear diff slight oil leak

Steering box has seepage (2.1.1 (e) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) wearing thin on limit (1.1.13 (a) (ii))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

exhaust system corroded

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) wearing thin on limit (1.1.13 (a) (ii))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

exhaust system corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

exhaust catalytic converter flanges corroded and weakened

exhaust system corroded

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

exhaust catalytic converter flanges corroded and weakened

exhaust system corroded

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Position lamp not working (4.2.1 (a))

Offside Stop lamp not working (1.2.1b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)