MOT Status
ExpiredMileage
156,161 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust mounting defective (6.1.2 (a))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive shock top mount area (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive top of shock mount area (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Play in steering rack inner joint(s) ()
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
vehicle has had lots of welding repairs done on both inner and outer sills and and covered in under seal
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))
Nearside Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Offside Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Exhaust mounting defective (6.1.2 (a))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive shock top mount area (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive top of shock mount area (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Play in steering rack inner joint(s) ()
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Exhaust mounting defective (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Gearbox mounting defective ()
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Exhaust mounting defective (6.1.2 (a))
Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Gearbox mounting defective ()
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Child Seat fitted not allowing full inspection of adult belt ()
Exhaust mounting defective (6.1.2 (a))
Nearside Rear Integral body structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner arches and crossmember (6.1.1 (c) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both outer sills (5.3.6 (a) (i))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Stop lamp not working (1.2.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Inner Brake pad(s) wearing thin (3.5.1g)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Centre Exhaust system not adequately supported (7.1.1)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Front Inner Brake pad(s) wearing thin (3.5.1g)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)
n/s/f tyre has a cut in tread
Nearside Front Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)
n/s/f tyre has a cut in tread
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
nearside front supension arm has very slight playu in ball joint
passenger airbag covered by photos
How Reliable is the Fiat Scudo?
Based on 592,996 MOT tests across 40,591 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AP07 YVB is a 2007 Fiat Scudo in Red with a 1,997cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 2007 Fiat Scudo models, the average MOT pass rate is 65.7% with a typical mileage of 103,444 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Fiat Scudo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 25,288 recorded failures. If you're considering buying AP07 YVB, it's worth having these areas checked by a mechanic before committing.
The Fiat Scudo typically stays on UK roads for around 29 years. At 19 years old, this Fiat Scudo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AP07 YVB?
You can check the full history of AP07 YVB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AP07 YVB registered?
AP07 YVB is a 2007 Fiat Scudo, first registered on 1 June 2007.
Is AP07 YVB safe to buy?
The MOT history for AP07 YVB shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AP07 YVB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AP07 YVB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.