2014 Qingqi Qm

Offside Indicator tell tale inoperative (4.9.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Upper Shock absorber has a slightly worn bush (5.3.2 (c))

Rear stop lamp switch attachment

handlebar alignment

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp insecure (4.1.1 (c))

Offside Indicator tell tale inoperative (4.9.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Upper Shock absorber has a slightly worn bush (5.3.2 (c))

Rear stop lamp switch attachment

handlebar alignment

Horn not working (7.7 (a))

Rear Brake grabbing severely (1.2.1 (c))

Rear Brake master cylinder insecure 1 bolt missing (1.1.10 (c))

Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate insecure (0.1 (a))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Wheel bearing has slight play noisy (5.1.3 (a) (i))

Front mudguard broken

Rear Upper Shock absorber has a slightly worn bush top nut appears to be tight , although bolt doesnt protrude (5.3.2 (c))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Vehicle dirty at time of test

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake excessively binding (1.2.1 (f))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Rear Suspension rod pin or bush excessively worn Lower linkage worn (5.3.4 (a) (i))

Registration plate does not conform to the specified requirements Incorrect sizing (0.1 (d))

Vehicle dirty at time of test

Drive chain slightly loose (6.1.7 (c) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Throttle operating incorrectly (6.2.7 (a) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)