2003 Peugeot 206

Brake load sensing valve stiff (1.1.17 (c) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Steering system slightly rough (2.1.1 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Steering system slightly rough (2.1.1 (a))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Exhaust mounting defective (6.1.2 (a))

Nearside Front fog lamp insecure

reverse lamp not working

Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases front joint and rear box split (7.1.2)

Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Bonnet damaged nearside front edge

General corrosion to rear axle and suspension parts

Brake load sensing valve defective and function impaired (3.6.E.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases Middle pipe to rear silencer (7.1.2)

Front Brakes imbalanced across an axle 33% max 30% (3.7.B.5b)

Fuel tank insecure Tank support strap corroded (7.2.1)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate deteriorated (6.3.1d)

rear brake application uneven (3.7.B.2)

Bonnet damaged nearside front edge

General corrosion to rear axle and suspension parts

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 30% (3.7.B.5b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Rear fog lamp not working (1.3.2b)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

bonnet damaged

front brake discs worn

front brake pads getting low

rear registration plate starting to deteriorate