2003 Ford Ka

Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced ARCH (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Brake hose damaged and likely to fail (1.1.12 (a)) DANGEROUS

Front Vehicle structure is corroded but structural rigidity is not significantly reduced FLOOR (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced BOOT (6.1.1 (c) (i))

Hydraulic leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced FLOOR (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced REAR CHASSIS (6.1.1 (c) (i))

Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))

Hydraulic leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced FLOOR (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced REAR CHASSIS (6.1.1 (c) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor (6.2.2 (d) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sills (6.2.2 (d) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor (6.2.2 (d) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sills (6.2.2 (d) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced boot floor (6.1.1 (c) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner outer sill (6.1.1 (c) (ii)) DANGEROUS

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced boot floor (6.1.1 (c) (i))

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Body has slight corrosion chassis next to exhaust mount (6.1.B.2)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Nearside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner/outer sill (6.1.B.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

both rear axle mountions split

Brake pipe excessively corroded (3.6.B.2c)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

both rear axle mountions split

Brakes imbalanced across an axle (3.7.B.5b)

Front Brakes imbalanced across an axle (3.7.B.5b)

Front Exhaust system not adequately supported (7.1.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside front brake application uneven (3.7.B.2)

Items removed from driver's view prior to test

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front brake discs slightly corroded.

Items removed from driver's view prior to test

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Items removed from driver's view prior to test

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Stop lamp not working (1.2.1b)

Nearside Rear coil spring fractured (2.4.C.1a)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front & rear end damage

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Rear coil spring fractured (2.4.C.1a)

Bonnet cannot be secured in the closed position (8.4.1) DANGEROUS

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

front & rear end damage

cut out of o/s/f tyre outer wall.